|
|
Metallization of technical plastics for lightweight traffic components with reduced fuel consumption
Sanetrníková, Dominika ; Boušek, Jaroslav (referee) ; Šimůnková, Helena (advisor)
The beginning of this thesis is dedicated to polymeric materials, which include plastics an composites. Plastics are shortly divided into two groups, thermoplastics and thermosets. The following part is the use of plastics and composites in traffic industry and briefly this work focuses on techniques of recycling of this materials. This work also focuses on the techniques of thin film deposition, electroless plating, electrodeposition as well and plating in the vacuum environment. special techniques of thin film deposition are also mentioned shortly. The coatings of polymer including cleaning and surface activation is introduced using various techniques including plasma treatment. The surface treatment of polyetheretherketone (PEEK) is included too. The final part describes performed experiments and discussion of results.
|
|
|
Tailoring of physical properties of ceramic surface by the metallic layer deposition
Dvorský, Vojtěch ; Kachlík,, Martin (referee) ; Salamon, David (advisor)
The master thesis focuses on the preparation of nickel coating on ceramic (Al2O3) substrate. The deposition of nickel was carried out by the electroless plating method in bath at various kinetic conditions. An impact of varied size, shape and roughness on the quality of the coated surface was investigated. The main goal was to find optimized conditions of the plating process of the thin metal coatings. Prepared nickel coatings were analysed by SEM, EDX analysis, mechanical profilometry and the plating bath was analysed by UV-VIS spectrophotometry. The continuous nickel coatings were achieved by modifying the deposition process, and the kinetic mechanism of experimental conditions was described.
|
|
|
Fabrication of conductive paths by electroless plating of printed precursors
Kováčová, Silvia ; Zita, Jiří (referee) ; Dzik, Petr (advisor)
The subject of this bachelor thesis is the preparation of conductive tracks by electroless plating of printed precursors. The experimental part deals with the preparation of standard samples based on the length of immersion time in the coppering bath. The precursor layers were applied with a technical pen to ceramic corundum substrates. The individual precursor layer substrates were immersed in the coppering bath in various time intervals. The structure of the grown copper layers was observed by an optical microscope and their thickness was determined by a profilometer.
|
|
|
Preparation and evaluation of metallic contacts for crystalline
Frodl, Miroslav ; Jandová, Kristýna (referee) ; Hladík, Jiří (advisor)
This work deals with the advanced methods of contact’s fabrication for monocrystalline solar cells and the appropriate methods for the analysis of their properties with a focus on the study and realization the contact’s structures with low contact and sheet resistance fabricated by galvanic and electroless processes. In the first part of the work is discussed the theory of solar cells and buried contacts and in the second part of the work is an evaluation of practical realization.
|
|
|
Fabrication of conductive paths by electroless plating of printed precursors
Kováčová, Silvia ; Zita, Jiří (referee) ; Dzik, Petr (advisor)
The subject of this bachelor thesis is the preparation of conductive tracks by electroless plating of printed precursors. The experimental part deals with the preparation of standard samples based on the length of immersion time in the coppering bath. The precursor layers were applied with a technical pen to ceramic corundum substrates. The individual precursor layer substrates were immersed in the coppering bath in various time intervals. The structure of the grown copper layers was observed by an optical microscope and their thickness was determined by a profilometer.
|
|
|
Tailoring of physical properties of ceramic surface by the metallic layer deposition
Dvorský, Vojtěch ; Kachlík,, Martin (referee) ; Salamon, David (advisor)
The master thesis focuses on the preparation of nickel coating on ceramic (Al2O3) substrate. The deposition of nickel was carried out by the electroless plating method in bath at various kinetic conditions. An impact of varied size, shape and roughness on the quality of the coated surface was investigated. The main goal was to find optimized conditions of the plating process of the thin metal coatings. Prepared nickel coatings were analysed by SEM, EDX analysis, mechanical profilometry and the plating bath was analysed by UV-VIS spectrophotometry. The continuous nickel coatings were achieved by modifying the deposition process, and the kinetic mechanism of experimental conditions was described.
|
|
|
Metallization of technical plastics for lightweight traffic components with reduced fuel consumption
Sanetrníková, Dominika ; Boušek, Jaroslav (referee) ; Šimůnková, Helena (advisor)
The beginning of this thesis is dedicated to polymeric materials, which include plastics an composites. Plastics are shortly divided into two groups, thermoplastics and thermosets. The following part is the use of plastics and composites in traffic industry and briefly this work focuses on techniques of recycling of this materials. This work also focuses on the techniques of thin film deposition, electroless plating, electrodeposition as well and plating in the vacuum environment. special techniques of thin film deposition are also mentioned shortly. The coatings of polymer including cleaning and surface activation is introduced using various techniques including plasma treatment. The surface treatment of polyetheretherketone (PEEK) is included too. The final part describes performed experiments and discussion of results.
|
|
|
Preparation and evaluation of metallic contacts for crystalline
Frodl, Miroslav ; Jandová, Kristýna (referee) ; Hladík, Jiří (advisor)
This work deals with the advanced methods of contact’s fabrication for monocrystalline solar cells and the appropriate methods for the analysis of their properties with a focus on the study and realization the contact’s structures with low contact and sheet resistance fabricated by galvanic and electroless processes. In the first part of the work is discussed the theory of solar cells and buried contacts and in the second part of the work is an evaluation of practical realization.
|
guest ::
